FANUC ROBOGUIDE Simulation Examples
Representative FANUC ROBOGUIDE simulation examples for cycle-time validation, robot reachability, collision detection, EOAT clearance, and layout review. These illustrate the types of validation SimuValidate provides.
How ROBOGUIDE Simulation Works in Practice
Each card below is a representative demo placeholder illustrating one or more validation techniques used in FANUC ROBOGUIDE simulation projects. They are not client projects and do not represent actual customer results.
Single FANUC robot cell simulated for part load / unload cycle-time validation. Robot path sequenced in ROBOGUIDE with FANUC kinematic constraints. Demonstrates cycle-time measurement and path-efficiency review.
FANUC robot with dual-gripper EOAT simulated for a pick-and-place sequence. Reachability analysis confirms all required positions are within joint limits. EOAT clearance checked against conveyor infrastructure and guarding.
Multi-robot conveyor transfer simulated in FANUC ROBOGUIDE with synchronized motion. Simulation-based throughput compared under two sequence configurations. Robot coordination zone checked for interference.
FANUC arc-welding robot simulated across a weld sequence with interference checking active on the arm, torch, fixture, and guarding. Demonstrates a collision / clearance log and approach / retract clearance review.
FANUC palletizing robot simulated across a full pallet-build sequence. Layout validated for reach coverage at all pallet positions. Demonstrates how ROBOGUIDE confirms robot model suitability before purchase.
Example of a Tier 1 Feasibility Study deliverable in ROBOGUIDE: the basic simulation model, reachability confirmation, layout review, and collision check included with every Tier 1 engagement.
Get a ROBOGUIDE Simulation for Your Cell
Submit your project details and we'll typically respond within 1 business day with scope and pricing.